|
eScape Version Notes
Downloadable Version (current to vers. 1.24)
ESCAPE
INFO · ABOUT·
FAQ
· VERSION
NOTES · FORUM
| Version 1.24 |
January 15, 2002
|
Bug Fixes & Improvements
Store scripts tokenized (compressed) for improved
setting load and save times.
Highlights with no foreground color visible in list dialog.
Revised the logic for when you're scrolled back to address the bug where it
spontaneously stops keeping windows at the bottom.
Improved highlights/ignores to allow multiple consecutive space characters
to be matched.
Fix own/private thought determination. There were some instances where a thought
message would appear incorrectly in the thought window.
Put in a work around for browser not showing text after a picture.
Under IE5.0 the browser may crash when closing the Script Edit dialog box.
This only happens on IE5.0 and we cannot figure out why. However, we have put
in a Alert Box that pops up when you close this dialog. The presence of the
alert box causes the crash to go away (reasons unknown!). This is annoying,
naturally, but you can get around it by upgrading to the latest and greatest
version of IE.
Changes to preset highlights now become effective immediately. Since moving
highlights to the server, it use to take up to a minute.
Only copy first line of multiple line selection to highlight string. Previously,
you could copy CR/LFs into a highlight string which would never match anything.
As requested on the boards, eliminated blank lines around script SetVariable
output.
Added script debug command to control script informational messages (defaults
on)
debug on
debug off
The logging status of each window is now saved with your settings. So, if you
had it on when you left the game, it will be on when you return. A drop-down
menu on the Windows Panel allows you to change the log filename used and will
also let you turn this feature on or off.
Cleaned up default settings loading for new characters. There was an intermittent
condition that could cause new players to not receive the settings (subtle differences)
and be unable to save settings until they re-entered the game.
Fixed some other minor highlighting bugs.
| Version 1.23 |
December 17, 2001
|
Bug Fixes & Improvements
Server Setting Deltas
In the past, when any change was made to a setting
(even moving a window around), all of the settings were sent as an update
to the server. There was a delay to batch up changes, but ultimately every
highlight string, script and so forth was retransmitted back to the server.
This would cause escape to "pause"
at unexpected intervals for some people, especially those with many highlight
strings.
With version 1.23, escape transmits much smaller
bundles of setting changes limited mostly to only those things that have
been added, removed or modified. This should help alleviate that problem.
Note: The state of the toggle buttons for audio
and pictures were not being saved properly. This has been fixed.
Hilighting
The "match partial highlight" option
behaved somewhat differently when we moved the highlighting logic to the
server. With V1.23, the logic is the same as before.
Highlighting for the Thoughts window is now
done in escape, not the server. Since escape 'rewords' thought messages
for that window, there was no way for you to highlight things the way you
wanted before. This is now fixed.
The "only show people on your names list"
for Arrivals and Deaths window feature is now faster.
Scripting
There was an obscure bug with scripts calling
other scripts. This has been fixed.
| Version 1.22 |
December 3, 2001
|
Bug Fixes & Improvements
We have re-engineered the text highlighting system
such that our servers do all of the highlighting logic before it makes it
to escape This will greatly improve the speed of highlight processing if you
have a lot of highlight strings. In fact, you should see no difference between
having 10 and several hundred regardless of the speed of the computer your
run escape on.
The highlight strings are still downloaded to
escape on startup, along with all the other settings for two reasons:
1. So you can edit them in the Highlights dialog.
2. So we can apply highlighting to commands you
type.
| Version 1.21 |
November 15, 2001
|
Bug Fixes & Improvements
1. Made script echo command retain consecutive
spaces.
2. Added font selection for column formatted text
on window settings dialog.
| Version 1.20 |
November 8, 2001
|
Bug Fixes & Improvements
1. Fixed thought highlighting to apply in main window
instead of thought window.
2. Fixed bleeding indicator to switch off when bleeding
is temporarily blocked.
3. Fixed "perp searches" window in Modus
Operandi so that its open/closed state is remembered.
4. Changed the file reading approach used by settings
import to hopefully remove the size limit that some users are reporting.
5. Modified the text output routine to improve
visual feedback responsiveness as text comes in from the game.
6. Added cut/copy/paste to the command input box
right-click menu.
7. As requested, the scripting command setVariable
can now be used to set a variable to an empty string. To do this just don't
specify a second argument.
| Version 1.19 |
November 5, 2001
|
Bug Fixes & Improvements
1. You can now record a script. Choose to create
a new script or edit an existing one. If editing an existing script, place the
cursor at the beginning of the line where you would like to insert the new text
and click on the record button. On a new script, you can type any preliminary
information if you would like and when ready, click on the record button. Then
type the commands as you would do them. Click the stop button when you are finished,
or the pause button to briefly pause recording the script. The script can then
be edited as usual.
2. The room window now displays the "You also
see", "Obvious exits" and "Also here" (or similar wordings)
lines (as in 1.18b).
3. The variables button on the "Edit Script"
dialog functions again.
| Version 1.18 |
October 30, 2001
|
Bug Fixes & Improvements
1.The MATCHes and MATCHREs
are evaluated in the order they are specified in the script. Previously
the MATCHes were done first, then MATCHREs. This is
now fixed.
2.Sorting highlighting by color now sorts
based on the background color, then the foreground color and finally
alphabetically by the text (case insensitive).
3. Sorting in the various list dialogs
are now persistent.
4. In the Settings... dialog for
the command box (right-click on command box) you can now set the minimum
number of characters a command must be in order for it to be remembered
by the command line history. This is useful for filtering out little
commands like movement. Defaults to 0, meaning it won't filter anything
out.
5. Messages in the Deaths and Arrivals
Windows now have time-stamps.
6. You can now set Auto-Drag mode.
The drop down menu on the exits panel, or by right-clicking on the
command box allows you to select the Drag... dialog. Type in
anything and any movement, such as "N" will be replaced
with "DRAG whatever N" (where "whatever" is what
you typed).
You can also highlight text in a game
window then right-click and select DRAG and it will fill that
text into the drag dialog automatically and start Auto-Drag. A STOP
DRAGGING menu item appears on these menus when you are in auto-drag
mode.
7. We've changed all of the "Appearance..."
menu items to be "Settings..." because they are often
used to specify things that are not related to appearance now.
| Version 1.17 |
October 25, 2001
|
Bug Fixes & Improvements
1. Scripting
MATCHRE
{label} /{regular expression}/[i]
Works as MATCH
except that it allows for Regular
Expression syntax for more sophisticated pattern matching.
Example:
MATCHRE
myLabel /[Rr]ound ?[Tt]ime/
This one will catch many forms of the text
"Round Time" even if it's written differently like "roundtime".
A regular expression uses the JavaScritpt syntax,
so you begin and end with a slash / character.
You can specify case insensitivy as such:
MATCHRE
myLabel /round ?time/i
The trailing "i" specifies case-insensitivity.
WAITFORRE
/{regular expression}/[i]
Works as WAITFOR
except that it allows for Regular
Expression syntax for more sophisticated pattern matching.
2. Loading
Your character will not appear in the game world
until after your eScape settings have fully loaded. This prevents your character
from being killed or otherwise harmed during this delay.
3. GUI Changes
Mini Exits Compass
There is now a small exits compass that appears
to the right of the command input box. You can right-click anywhere in the
lower bar to for a menu that allows you to turn this on or off. You can
even click on the arrows to move (this is not true of the big compass yet).
Command Box Appearance
You can right-click on the bottom bar for an
Appearance... menu item that brings up a dialog box. From here you can set
the colors of the command box text, background and round-time bar as well
as the font used.
Remember, to set colors first select the box
you want to change then select a color. In this case you have a text, background
and RT box.
Note that the appearnace dialog box for the
command box has a reset button to revert everything to the default settings
should you get things hopelessly messed up.
GS4 Stance Shield
The shield indicator which shows your stance
was previously filled with a red color. But this seemed to indicate health
to some people, so we changed the color to blue to make it less worrisome
when your stance changes.
4. No Java Page
If you attempt to use eScape and do not have Java, or have it disabled,
you now are sent to a page which describes the problem and solution.
5. Navigate Away message
When you close a session in eScape, the dialog box now indicates which
character is being affected. This is useful if you run more than one eScape
session (in multiple games for example).
| Version 1.16 |
October 16, 2001
|
Bug Fixes & Improvements
1. Fixed bug where windows positioned on left
or top edge are repositioned away from the edge at startup.
2. Fixed double macro invocation when focus is on a scroll bar.
3. Fixed bug where script did not wait on a second round time received
during
round time.
4. Fixed auto-sneak to work with up, down, and out.
5. Fixed script nextroom command
to work when room descriptions are disabled.
Performance Enhancements
1. Faster removal of lines from top of scroll
buffer. This is a general speed-up that should make things snappier for some
people. More are on the way.
2. Decreased delay bring up large list of highlight
strings.
3. Decreased delay sorting large list of highlight strings.
4. Decreased delay loading settings with large scripts.
| Version 1.15 |
October 9, 2001
|
Bug Fixes & Improvements
1. Room names with quotes would show up with "
in window title; fixed.
2. In some cases, when pressing Enter on a blank line would do nothing. Now
it sends a blank line every time (which is required for some parts of some
games).
3. When in some parts of the game, like the Character Manager, input was
not being echoed; fixed.
4. The thoughts window will now designate [private] thoughts.
5. Thought highlighting in the game window is now working.
5. Sometimes a window could get stuck at the top of the window area. Although
we did not find the cause, we put code in fail-safe code to keep this from
happening.
Scripting / Variables
Variable names no longer can have spaces. This has the following ramifications:
a) Any variable that current exists that has spaces in the name will be modified
such that the name has underscore characters ( _ ) where spaces appeared.
This occurs on importing settings too.
b) Variable names referenced in scripts that have names will need to be modified.
c) Scripts can delineate a variable name with a space. So %myvariable
now works as well as %myvariable%.
Using trailing %'s is useful for concatenating variables side-by-side in this
manners: %var1%%var2%%anothervar%.
d) When you type space when naming a variable,
a underscore is substituted automatically.
| Version 1.14 |
October 2, 2001
|
Bug Fixes & Improvements
Scripting
1. The MOVE command was occasionally misbehaving.
This has been fixed.
2. COUNTER DIVIDE works properly now. (geez!)
3. A warning message appears when an undefined variable
is referenced in a script.
4. Some new script commands:
|
AddToHighlightStrings
string="{text}" [options]
Adds/changes a highlight string.
[options] are optional
arguments, as follows:
| foreColor={color} |
Foreground color, see {color} below. |
| backColor={color} |
Background color, see {color} below. |
| highlightEntireLine={True
| False} |
If TRUE, highlights enitre line (default
is TRUE). |
| notOnWordBoundry={True
| False} |
If TRUE, matches partial words (default
is TRUE). |
| matchPartialWord={True
| False} |
Alias for notOnWordBoundry. |
| caseInsensitive={True
| False } |
if TRUE, case is not checked (default
is TRUE). |
| ignoreCase={True
| False} |
Alias for ignoreCase. |
|
|
| {color} |
May be any HTML color specification. For example:
foreColor=#FF0000
backColor=red
If you use a one or two digit number, you will
get a set color for foreground/background. This is to make imported
Wizard scripts work, however you will not get the color you expect.
eScape does colors differently, so the palette index method the
Wizard uses does not make sense. Change these to HTML color specifications.
|
|
|
AddToHighlightNames string="{text}"
[options]
Same as AddTohighlightNames but adds/changes the Names highlights.
DeleteFromHighlightStrings
string="{text}"
Removes indicated text from highlight strings.
DeleteFromHighlightNames string="{text}"
Removes indicated text from Names highlights.
SetVariable {variable name}
{value}
Sets or adds the variable {variable
name} to the value of {value}.
Do not use %..%'s in the variable name. If the variable name has spaces,
use "{variable name}".
The rest of the line is considered the value, so spaces and even quotes
are allowed.
You can use %variablename%
sequences in the {value}.
These are substituted with their value before the command processes. This
lets you do some wacky fun things. To use a % character in the {value},
use %%.
DeleteVariable {variable name}
Deletes the indicated variable {variable
name}, if it exists.
|
These commands strive for backwards compatibility
with the Wizard. Some noteable exceptions:
a) Specification of color values is different because
we don't use the Wizards set 15 color palette.
b) We don't have global highlights, sot he AddToGlobalHiglights
command does not exist.
c) The SetVariable
an DeleteVaraible commands are
unique to eScape because the Wizard does not have arbitrary variables.
d) Aliases for the options in some commands have
been added to reflect the wording in the eScape dialogs. You can use either
one, but only the Wizard version is backwards compatible.
| Version 1.13 |
September 28, 2001
|
Bug Fixes & Improvements
Scripting
1. IF_# commands were broken in 1.12, now
they are fixed again.
2. A quote may be embedded in a non-quotes
argument to a Wizard script command.
3. Argument parsing for the SAVE command is
now identical to the Wizard (Only uses first argument, use quotes for
multi-word arguments).
4. Messages such as script ECHO messages now
correctly cause line feeds.
5. Script COUNTER DIVIDE command have their
results truncated to an integer.
6. Trailing spaces after script GOTO label
are ignored. Also, any trailing colon on a GOTO and MATCH statement label
are ignored.
7. Added SORT by buttons to script dialog.
AUTO SNEAK
Perviously auto-sneak was implemented using
the {move} command in a macro. Now auto-sneak is automatically processed
on abbreviated directions (like: n, s, e, nw) and the verb go. Therefore
the movement macros have been replaced with the pattern "\xn\r"
automatically. Auto-sneak should work much more like the Wizard now.
| Version 1.12 |
September 27, 2001
|
Bug Fixes & Improvements
Scripting
1. MATCH and WAITFOR are
now case-insensitive.
2. You can use COUNTER SUBTRACT
now.
3. COUNTER ADD and COUNTER
SUBTRACT have a default argument of 1 (if not specified).
4. You can now use COUNTER MULTIPLY
and COUNTER DIVIDE (default argument of 1 if not specified).
Remember, the counter is an integer, not floating point! DIVIDE
by 0 yields 'Infinity', so don't do that. :) These two are extensions
to the Wizard language and not backwards compatible.
5. The COUNTER initialize to
0 on script run.
6. %s% variable is now NOT
reset when a script runs, so you can use it cross-script.
7. Improved error messaging with scripts.
You also get a line number with your errors now.
Macros
1. {=scriptname} runs script
'scriptname'.
2. {script} opens the script dialog.
3. {panels} toggles the visibility
of the panel bar.
4. {variables} opens the variables
dialog.
5. {macros} opens the macros dialog.
6. {wounds} / {injuries} both of these
toggle the "see injuries" / "see scars" on
the health panel. (GS4 only for now)
7. Help updated to reflect changes.
Auto Sneak
When you type the command GO
the GO will be replaced with SNEAK if you have auto-sneak
on and you are hidden. For example, GO PATH will become
SNEAK PATH.
Dialog/Window Positioning
1. Script Add/Edit and Variable Add/Edit
dialog boxes now appear centered relative to their parent dialog
box.
2. The main window auto-sizing respects
the task bar's presence now.
Logging
1. Logging check box accurate now
2. Text was going into logs even after
being closed.
| Version 1.11 |
September 26, 2001
|
Bug Fixes & Improvements
Scripting
1. Labels are no longer case sensitive.
2. Blank lines are now allowed.
3. Script commands will wait for a Round
Time to end.
4. A very slight delay prior to a PUT
allows for further key presses to be processed in tightly looped scripts,
thus allow you to use Esc to cancel.
5. You can use Shift-Esc to pause a
running script, then Esc to continue again. The prompts remind
you of this when you run a script.
6. You can now pass multi-word arguments to
a script. Normally script arguments are seperated by spaces, but this
makes it impossible to pass arguments that have two or more words. You
accomplish this in three ways, at your preference: connect the words using
a period (.) an underscore (_) or enclose them in quotes. For example:
.happyscript red_stone blue_stone
.happyscript red.stone blue.stone
.happyscript "red stone"
"blue stone"
Any of these will result
in the variable %1% being "red stone" and %2% being "blue
stone".
7. PAUSE with no argument is the same as PAUSE
1
8. Scripts import properly now.
Movement / Auto-Sneak
You can now right-click on the Exits Panel
(the one with the Compss) to access some options. The one that is currently
implemented is Auto Sneak which will prepend the SNEAK command
in any keypad movement if you are hidden. Default is ON.
Macros
Defined some new escape sequences {bufferBottom}
and {bufferTop} which can be bound to a key to jump the active
window to the top or bottom of the buffer.
For new characters, the default is for CTRL-PAGEUP
and CTRL-PAGEDOWN to be bound to top and bottom respectively. Additionally
the Esc key will go to the bottom (if a script is not running). Note that
Esc is useful for canceling any text you've entered into a text box (aka,
the command box) so we have coded this key special such that if used for
the {bufferBottom} command, it'll propagate Esc to the text
box if the buffer is already at the bottom.
NOTE: If you are already using eScape, then you will have
to bind these yourself as macros. We didn't want to overwrite anything
you might have done by forcing it.
| Version 1.10 |
September 25, 2001
|
Bug Fixes & Improvements
Scripting
Yes, at long last, eScape supports scripting!
In fact, it supports the very same Wizard script language you have come
to know and (ahem) love.
But please understand that scripting is a very
new feature. The implementation probably has bugs and incompatibilities
and we need your help to sort them out and let us know what we didn't get
right! Also, the user interface needs some work as well. Consider this a
rough draft!
We have not implemented recording macros yet,
but that will come soon. First we want to get the language implementation
solid. Then go from there.
You can copy and paste your script text into
our simple script editor, or edit the export file and reimport as you see
fit.
Features like storing scripts on your client,
and so forth, are planned for the future.
NOTE: There is one IMPORTANT Wizard language
compatibility issue: Because our variable names can have spaces in them,
you must enclose variable names in %% pairs. For example, %weapon must be
%weapon%.
Help us debug this by using your existing Wizard
scripts, if you have them, and reporting problems on the forums.
Import / Export
Import and Export have been expanded to support
scripts.
Blank Settings
There was a bug that when a value in some settings
was blank, such as a variable with an empty value, then eScape would crash
some versions of IE. We don't know why this occurs exactly, but we've made
some work arounds in the timing which seem to prevent the crash.
GameMaster Panel
The second GameMaster created panel is now available!
Players in GemSotne III will now see a Spells panel which lists all
the spells their character knows. You can click on them to PREP them.
The spell lists can be expanded or collapsed.
More on the way!
| Version 1.09 |
September 24, 2001
|
Bug Fixes & Improvements
Character Manager Bug
When creating a new character, sometimes eScape
would sometimes hang in the character manager. This should now be fixed.
Importing
You can now tell eScape to wipe out (completely
replace) settings during an import.
Thoughts Window
The Thoughts window now indicates the channel
in GS4 in the same way as the Wizard.
| Version 1.08 |
September 21, 2001
|
Bug Fixes & Improvements
Command Buffer
The ENTER key works now! We were going to
wait a few versions to address this, but then had a spare moment between
munching snasages to go ahead and fix it.
Appearance Settings
1. For users of IE 6.0, you now get a list
of all the fonts on your system. Only IE 6.x (and better) expose the necessary
functions to do this, so the behavior is still unchanged for older versions
of IE.
2. You can use bold with fonts now too!
Settings Reset
On the various settings dialog boxes there
is now a [reset] button which allows you to reset them to their initial
state. For highlight strings, this means deleting everything. For macros,
it means reverting to the default macro settings. THESE WILL WIPE OUT
ALL YOUR CUSTOM ENTRIES IN THAT DIALOG BOX. A warning box confirms
that you are really sure you want to do this before proceeding.
Friends Filters
The Arrival, and Death windows
now have the ability to only show messages from/about those people who
are on your Names highlight settings. Bring up the APPEARANCE dialog
box for any of these windows and you can individually (on a per window
basis) turn this feature on or off.
Our plan is to add this option for the THOUGHTS
window as well, but this will take a little more time as it is more complex.
First GM Panel
The first (of many to come) GameMaster created
panels makes its appearance in DragonRealms. The Time/Weather panel gives
you information visually that you'd normally get using the TIME
command. You can get a rough sense of the time and weather (if outdoors).
Tons more DR panels in the works... most already
have their artwork done and all that remains is wiring them up!
GemStone IV will be next with a Spells panel,
expected early next week.
| Version 1.07 |
September 20, 2001
|
Bug Fixes & Improvements
Main Window
The main window will now open to 1/4 the size
of your screen resolution, or a minimum of 800x600 whichever is larger. Once
you resize the main window the new size will be stored on a IE 'cookie' on
your computer to be used the next time. Using a 'cookie' makes it possible
for there to be different main window sizes on different computers.
Further, checks are done to make sure the main
window actually fits on the screen and makes the necessary adjustments if
it does not. This is important, for example, if you radically change your
screen resolution.
You must have cookies enabled for this site for
this feature to work (only a problem if you use a utility to block cookies).
Dialog Boxes
1. There was a bug where you could open the same
dialog box multiple times, such as for string highlights, variables, etc.
This caused, as you might expect, problems. Clicking multiple times on the
"Variables..." button, for example, would open several identical
Variables dialog windows. Many of the problems people were experiencing with
editing variables and such were due to this problem. It has now been fixed.
2. Dialog boxes are now centered relative to your
main window.
Import / Export
You can now export and import variables.
| Version 1.06 |
September 19, 2001
|
New Feature
Macro Variables
You can now create named variables which
can be used in macros. These will also be used in scripts when that feature
is implemented.
You access the variables dialog from the Macro
Keys dialog. First, click OPTIONS then MACRO KEYS, then VARAIBLES...
to bring up the variables dialog. From here you can add, edit and delete any
named variables.
Unlike the Wizard, you name the variables whatever
you want and you can (currently) have as many as you want. A variable name
may contain any characters except %.
In macro definitions you can use variables by
specifying them between matched % pairs. For example:
ATTACK
%target%\r
This will output the command ATTACK followed by
whatever is in the variable named "target". The match is case-sensitive.
Unlike the Wizard you must use matching % pairs, this is because we allow
you to use spaces in your variable names.
Note, a variable can reference another variable.
When processing, the output will stop after the 5th level of "recursion".
This prevents circular references from locking up eScape.
| Version 1.05 |
September 18, 2001
|
Bug Fixes & Improvements
Appearance Dialogs
1. All of the dialog boxes that have color
selection now feature a new set of swatches that greatly expand the number
of colors you can choose from.
Command Buffer
1. Selections highlighted
on the command bar will now be overwritten if you use a macro (this is how
you would expect it to work).
2. All macros and commands are procesed into a
queue buffer such that they come out in consecutive order. This provides a
more predictable behavior. For example, you issue a series of macros (or even
multi-line macros) and type a command, then issue more macros they'll all
happen in the order you expect.
highlighting
1. Commands are sent through the highlight system.
Macros
1. The {rest} command has been added as a macro.
If you are using eScape for the first time, CTRL-R defaults to "{rest}".
Otherwise, add it yourself to any macro you wish. The {rest} command, as a
macro, will enter REST mode. Every two minutes it will issue the "EXPERIENCE"
command to the game until you type a key to leave REST mode.
2. The /? option for Macros was not documented
in the help (but always worked). It is now documented.
Settings
1. It now remembers the last logfile name used.
You should only have to make path changes once now.
2. The Prompt setting in the Game Window appearance
window now shows an example of the prompt setting in the window.
3. When importing settings, it will now catch
errors and give you a message about what and where the error is. The setting
with the error will not be saved.
4. If you are disconnected from the game while
changing settings in a dialog box, such as macros or highlights, you will
get a warning that the settings will not be saved (but can still be exported).
Other
1. In GS4, the bug where Cast Time (CT) going
to some absurd number has been fixed.
2. The hidden state in the status boxes has been
replaced with a "bush" icon. You will be able to tell when you are
invisible and hidden now.
3. About dialog implemented (contain your excitement!)
| Version 1.04 |
September 13, 2001
|
Bug Fixes & Improvements
Command Buffer
1. Previously we stopped duplicate commands from repeatedly showing
in the command history buffer. This introduced a bug that would skip the duplicate
command when scrolling up through the history. This bug has now been removed
and the history should scroll up and down correctly. We told you it was hard!
2. When typing in the command buffer, using the down arrow clears
the command buffer.
3. When typing, the cursor location should remain where it last
was when you move the mouse away and click elsewhere, use macros, copy/paste
into the command buffer, etc.
4. The @ command in macros should work correctly again.
5. The \x macro command to clear the command buffer now works.
By default a macro does not clear the command buffer (which can be useful).
\x must appear at the start of the macro.
Highlights and colors
1. Transparent can no longer be chosen as a background or foreground
color choice for window appearance settings. It still appears as an option (for
now), but is not clickable.
2. Background highlights in IE 5.0 should show up more often.
The problem appears to be with the browser getting confused. If they disappear,
you can highlight the section with your mouse to fix it temporarily. Upgrading
to IE 5.5 fixes it permanently. We'll continue working on this, but don't want
to make any promises.
3. When you select something in a window, trailing-spaces tend
to get selected as well. This is a problem when you use the right-click menu
to copy them to the custom highlights/ignores. Now, trailing spaces are stripped
when doing this operation.
4. Overlapping highlights on the same line should all show up
properly now.
Miscellaneous
1. The room title now shows on the Game Window title bar.
2. The window title bar would sometimes disappear when that window
was maximized. Should be fixed.
3. Logging now shows a user prompt to fill in a name and
path to save to. The default has been changed to c:\eScape*.htm where the *
will increment a number each time you save in the same location.
4. When displaying the status prompt, 'R' for 'in roundtime'
is properly displayed.
5. The "Type commands here" hint box will go away automatically
once you've defined any custom highlighting.
New Feature
1. On the Appearance dialog for the GAME Window (only) you can
now specify how you want your prompt to appear. The choices are "Simple"
which display a > character as normal; "Status" which displays
the > preceeded by any status prompt indicators (like 's' for sitting); and
"None" which supresses the printing of the prompt all together. Note
that when you enter a command it will appear with a > prompt in front of
it irregardless of this setting.
| Version 1.03 |
September 10, 2001
|
Bug Fixes & Improvements
Command History Fixes
1. Command queue logic rewritten to remove occasional missed commands during
up/down arrow. (Harder than it sounds!)
2. When clicking on command box, cursor moves to where you click instead of
the beginning/end.
3. Commands from macros go into command history.
4. Commands are now processed through the highlight strings.
Window Fixes
1. Arrivals in Modus Operandi go to correct window.
2. Room descriptions were now show up in the familiar window as appropriate.
3. When setting colors for a windows appearance, right-click can be used
to set background color.
| Version 1.02 |
September 7, 2001
|
Bug Fixes & Improvements
Command History Fixes
1. CTRL-ENTER does REPEAT LAST COMMAND
2. ALT-ENTER does a REPEAT SECOND TO LAST COMMAND
3. After going back in command history, first DOWN ARROW would show the
same command again.
4. A command is not added to the history if it duplicates the one at the bottom
of the history already.
5. When changing focus away and back to the command history the cursor is not
placed at the end of any text currently in the input box. This makes it possible
to CTRL-C / CTRL-V text from other windows into the command window
after the current command.
6. Empty lines do not go into the command history.
7. UP ARROW when nothing in history no longer shows "default"
In dialog boxes that allow selecting colors: RIGHT-CLICK
on a color swatch will set the background color. This wasn't a bug, but
people use to the Wizard expected this behavior. The intended way to
set the background color was to select the background swatch, then a color.
Now you can do it either way.
Window Fixes
1. Thoughts now go to thought window correctly (including Voln)
2. Death messages go to Death Window
3. You can now use the normal IE right-click menu when mouse is over
an in-line image. This lets you save the picture and other operations.
4. Several broken image problems (mostly in DR) have been fixed.
5. On some computers (variations of operation systems, IE, or window style settings)
scroll bars would appear on various dialog boxes. This has been fixed (althoug
on these systems the window will be slightly too small... should not be noticable).
6. Added Fixedsys font.
Macros Fixes
1. You can now define more ALT key combinations. IE does do a "beep"
sound on some of (or all) of these keys. To get around this, go into the Windows
control panel, select Sounds and Multimedia and change the Default
Beep entry to (None).
2. You can now define a macro for F4.
3. You are now prevented from using SHIFT with numeric keypad
(IE doesn't allow it).
Sound
1. There was a time limit on how long a sound/MP3 would play. This has been
removed.
| Version 1.01 |
September 6, 2001
|
Bug Fixes
Text now goes to correct window. Corrected problems with
Thoughts, Disconnects, Logging, etc.
Broken highlight presets should all now work. Some games use
different variations, we believe we have them all accounted for. Fixes speech,
whisper, etc.
Issues with numeric keypad direction movement not working as
expected have been fixed.
Tool Tip on rearranging panels was misleading. It suggested you
could drag them out of the panel bar. New wording may help.
Fixed bugs that caused DragonRealms "shim" to die.
This would cause disconnects (even though game was still running) and inability
to connect to DR while it was down.
Improvements
When you use command history, the text is no longer highlighted.
Instead the cursor is at the end of the line as most people were expecting.
When opening a window with the Window Panel the window
will pop to the front. This helps solve user confusion over weather the window
actually opened or not.
New Features
Added Death window
{DRContent} |
HOME
